Medical X-ray Film Processor (CE)

It has strong practicability of the appearance and the demountable design of the side board. it is convenient for using offilm processor adjustment and maintain . The processor time will be fixed 135seconds ,you can directly rish printing film ,lab film and mammary film etc. It is simply for the ideal mirco-computer board to set up the temperture and speed of the film processor. It keeps film to be transferred for the excet gear ,if that ,also simply daily clean. Special gear combination and novel design of drying channelensure the drying film . Anti-oxidation and anti-crystal can avoid to the tank aging ,at the same time ,product the clear image. High economic benefit:it reduces the consumption of the water when it to be work ,measure the area of the input .and at the same time ,continue to replenish the tank according to the input capacity .It isnot only save the tank ,but also improve the image film of the clear. simply control and good product. control panel is vivid for control process.the temperture adjustment of the developer can improve the image film clear and safity to choose the different processor time for 105s,135s,165s. Model LD-14Max washing size (mm)Max 35×∞(14”×∞)Min washing size( mm)10×10(4”×4”)Film typeSheet or roll X-RAY ,CT,MRI etc.Processing time (adjustable)105/135/165s(whole processor); 25/35/45s(develop )90s processing time washing78sheet/h(14”×17”),120sheet/h(10”×12”)Developer temp.28°C-37°C(adjustable)Dryer temp.40°C-65°Csheet inductionImport switch with jiggleTransferImport engine with outstanding capabilityTank volumeDeveloper ,fixer ,washing each for 5litersAnti-oxidation, Anti-crystal60mins ,30mins interval Tank capacity Each 12.5liter (developer/fixer /washing)Environment temp. 5°C-25°CEnvironment humidity ≤60%Replenishment20-200ml for 0.5s.q./meterConsumeWashing2000w,not work 120w Dimension 760×600×420cm.(include rank)power220V/50HZ/8.8Aweight60kilograms(contain the tank)